background image

5

6

SAFETY SYMBOLS

ELECTRICAL REQUIREMENTS 

DOUBLE-INSULATED APPLIANCES

In a double-insulated appliance, two systems of insulation are provided instead of 
grounding. No grounding means is provided on a double-insulated appliance, nor should 
a means for grounding be added to the appliance. Servicing a double-insulated appliance 
requires extreme care and knowledge of the system, and should be performed only by 
qualified service personnel. Replacement parts for a double-insulated appliance must be 
identical to the parts they replace. A double-insulated appliance is marked with the words 
“Double Insulation” or “Double Insulated.” The symbol (square within a square) may also 
be marked on the appliance.

DOUBLE-INSULATED: GROUNDING NOT REQUIRED. WHEN SERVICING, USE ONLY 
IDENTICAL REPLACEMENT PARTS.

This leaf shredder is double-insulated, eliminating the need for a separate grounding 
system. Use only identical replacements parts. Read the instructions for servicing double-
insulated leaf shredders before servicing. Use this leaf shredder only as described in this 
manual.

Warning  

To reduce the risk of electric shock, do not expose to rain. Store 
indoors.

Warning  

For your own safety, read and understand the operator’s manual. Do 
not run the unit unattended.

CaUTiOn  

To reduce the risk of injury from moving parts, unplug the unit before 
cleaning or servicing.

UNPACKING

Due to modern mass production techniques, it is unlikely that your leaf shredder is faulty 
or that a part is missing. If you find anything wrong, do not operate the tool until the parts 
have been replaced or the fault has been rectified. Failure to do so could result in serious 
personal injury.

The following table depicts and describes safety symbols that may appear on this product. 
Read, understand, and follow all instructions on the machine before attempting to 
assemble and operate.

Symbol

Description

SAFETY ALERT, indicates a precaution, a 
warning or a danger.
READ THE OPERATOR’S MANUAL(S) Read, 
understand and follow all instructions in the 
manual(s) before attempting to assemble 
and operate.
WARNING! Keep out of rain and away from 
wet areas.
Risk of eye injury. Use safety glasses or 
similar eye protection. Wear hearing protec-
tion.

Wear protective gloves when using the ma-
chine and handling debris. Wear protective 
shoes during operation.
CAUTION! Remove plug from outlet immedi-
ately if the cord is damaged or cut.
CAUTION! Remove plug from outlet before 
conducting inspection, cleaning or mainte-
nance.
DANGER! Keep hands and feet away from 
cutting area.

Keep bystanders at a safe distance.

Double Insulation

Summary of Contents for YF8000











Reviews: