SERVICE RECOMMENDATIONS
23
1741078
SERVICE RECOMMENDATIONS
PROCEDURE
FIRST
2
HOUR
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
10
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
BEGINNING
EACH
SEASON
BEFORE
STORAGE
S
N
O
Tighten all screws and
nuts
√
√
√
O
W
B
Adjust Drive Belt *
√
√
√
B
L
O
Adjust Traction Drive Belt
√
√
√
√
O
W
E
R
Lubricate Auger Shaft
(See Shear Bolt Replace-
ment)
√
√
Oil, Check
√
√
√
E
N
Oil, Change
√
√
√
N
G
I
Check and Clean Spark
Plug
√
√
I
N
E
Replace Spark Plug
√
E
Clean and Inspect Spark
Arrestor
√
* Adjust after 2 to 4 hours of use.
Adjust after First 10 hours and then Every 25 hours of use.
The warranty on this snow blower does not cover items that
have been subjected to operator abuse or negligence. To re-
ceive full value from the warranty, operator must maintain
snow blower as instructed in this manual. The following
Ser-
vice Recommendations
is supplied to assist operator to
properly maintain snow blower. This is a check list only. Ad-
justment referred to will be found in Adjustments/Repairs
section of this manual.
Maintenance, replacement, or repair of the emission control
devices and systems can be performed by any non-road en-
gine repair establishment or individual. Regular maintenance
will improve the performance and extend the life of the en-
gine.
AFTER EACH USE
1. Check for any loose or damaged parts.
2. Tighten any loose fasteners.
3. Check and maintain the auger.
4. After each use, remove all snow and slush off the snow
blower to prevent freezing of auger or controls.
5. Check controls to make sure they are functioning
properly.
6. If any parts are worn or damaged, replace immediately.
Summary of Contents for 6331790-43 Series
Page 37: ...NOTES 37 1741078...
Page 38: ...NOTES 38 1741078...
