Yard-Man 604 series Operator'S Manual Download

Page: 13 / 56

Operating

Your Lawn

Tractor

WARNING

Never leave a running
machine unattended.
Always disengage
PTO, move shift lever
into neutral position,
set parking brake, stop
engine and remove key
to prevent unintended
starting.

Throttle Control Lever

The throttle control lever is located on the right side of
the tractor’s dash panel. This lever controls the speed
of the engine and, on some models, when pushed all
the way forward, the choke control also. When set in a
given position, the throttle will maintain a uniform engine
speed. See Figure 9.

IMPORTANT

: When operating the tractor with the cutting

deck engaged, be certain that the throttle lever is always
in the FAST (rabbit) position.

Choke Control

On some models, moving the
throttle lever all the way forward
activates the engine’s choke
control. On all other models, the
choke control can be found on
the left side of the dash panel
and is activated by pulling the
knob outward. Activating the
choke control closes the choke
plate on the carburetor and aids in starting the engine.
Refer to

Starting The Engine in this section

of the

manual for detailed starting instructions.

Brake Pedal

The brake pedal is located
on the right front side of the
tractor above the drive pedal
along the running board. The
brake pedal can be used for
sudden stops or setting the
parking brake.

NOTE

: The brake pedal must

be fully depressed to activate
the safety interlock switch when starting the tractor.

Ignition Switch Module

WARNING: Never leave a running
machine unattended. Always
disengage PTO, move shift lever
into neutral position, set parking
brake, stop engine and remove
key to prevent unintended
starting.

To start the engine, insert the key into the ignition switch
and turn clockwise to the

START

position. Release the

key into the

NORMAL MOWING MODE

position once

the engine has fired.
To stop the engine, turn the ignition key counterclockwise
to the OFF position. See Figure 10.

IMPORTANT

: Prior to operating the tractor, refer to both

Safety Interlock Switches

and

Starting The Engine

in this section of the manual for detailed instructions
regarding the Ignition Switch Module and operating the
tractor in

REVERSE CAUTION MODE

Drive Pedal

The drive pedal is located below the
brake pedal on the right front side of
the tractor along the running board.
Depress the drive pedal with your right
foot when the tractor shift lever is in
either FORWARD or REVERSE to cause
the tractor to move. Ground speed is
also controlled with the drive pedal. The
further down the pedal is depressed, the
faster the tractor will travel. The pedal
will return to its original position when it’s
not depressed.

IMPORTANT

: Always set the parking brake when leaving

the tractor unattended.

��

Figure 9

��

Figure 10

IMPORTANT: Prior to
operating the tractor,
refer to both Safety
Interlock Switches
and Starting The
Engine in this section
of the manual for
detailed instructions
regarding the Ignition
Switch Module and
operating the tractor
in REVERSE CAU-
TION MODE.