8
1 Feed hopper.
1 Bag of nuts and bolts that includes:
Bolts, washers, nuts, cotter pins, rotating shaft
hopper clamps, etc.
2 Axles (Rotating, Fixed)
4 Wheels
Manuals and Operator safety accesories.
Assembly of the YARDBEAST 2510
Note:
This unit is shipped without fuel and
without oil in the engine. Fill with either diesel
fuel or gasoline (depending on the engine
type) and oil as indicated in the instructions
in the engine manual BEFORE operating your
wood chipper.
Taking shipping cage off.
1. Remove plastic packing
2. Unscrew the legs of the cage as shown in
next Figure.
3.
Remove upwards (use 2 people if
possible) as shown in next Figure.
4.
Remove the grinder removing the
platform anchoring ships. See Fig
.
Axle Assembly
1. Inserting front axle and bolt it as shown in
Fig.
a. 4 Hex Bolts 3/8 "x 1"
b. 4 Hex Nuts 3/8 "
c. 4 Pressure Washers 3/8 "
d. Plain Washers 4 3/8 "
Summary of Contents for YB2510
Page 23: ...23 NOTES...
