5
Mt. Vernon Arbor
Assembly Manual
Fasten plate to arch using 2.5" screws provided,
while making sure plate remains aligned. Holes
are pre-drilled on plate.
Repeat step #7 on opposite side.
You are now ready to install caps and finials.
Align pre-drilled hole in cap with pre-drilled
hole in arch. Fasten finial and plate to the arch
by hand turning finial with lag through the
pre-drilled holes. Repeat on opposite side.
Your completed arbor top should look like
this.
You are now ready to fasten the arbor sides to
the arbor top.
Step:11
Step:12
Step:10
Step:9
Step:8
Step:7
Patiova.com
Info@
Patiova.com
6649 N. Moscow Road Parkesburg, PA 19365
610-857-1359
