23
support@yardistrystructures.com
Hardware
#6 x 30 mm
Trim Screw
Step 6: Attach Plinths to Corner Post Assembly
Part 4
Note: Make sure all plinths are lined up, flush and level before installing remaining screws.
D:
After the End Plinths have been placed, go back and install the two remaining #6 x 30 mm Trim Screws per
end to the assembled Plinth of the Pergola Room. (Fig. 6.7 and 6.8)
E:
Attach 2 #6 x 30 mm Trim Screws to each end side as shown in fig. 6.7 and 6.8.
Fig. 6.7
Fig. 6.8
48 x #6 x 30 mm Trim Screw
