29
support@yardistrystructures.com
Trellis Clip
A:
On a flat and level surface, fit together one (062) Trellis End 33-1/2” and one (300) Trellis End 110-1/2”.
(fig. 12.1)
B:
Place one Trellis Clip over the joined ends and attach with one 1/4 x 2” Wafer Bolt (with 1/4” lock nut).
(fig. 12.2)
C:
Repeat Steps A and B until there are 9 Trellis End Assemblies.
Step 12: Assemble Trellis Ends
9 x (062) Trellis End 33-1/2” 38.1 x 63.5 x 850.9 mm (2 x 3 x 33-1/2”)
9 x (300) Trellis End 110-1/2” 38.1 x 63.5 x 850.9 mm (2 x 3 x 110-1/2”)
Hardware
Wood Parts
Fig. 12.2
9 x Trellis Clip
9 x 1/4 x 2” Wafer Bolt (1/4” lock nut)
(062) Trellis
End 33-1/2”
Fig. 12.1
1/4 x 2”
Wafer Bolt
1/4” Lock
Nut
(300) Trellis
End 110-1/2”
(062) Trellis
End 33-1/2”
(300) Trellis
End 110-1/2”
