15
support@yardistrystructures.com
•Y06992-908 Male Snap x4 per post
•#12 Screw Bezel
Move curtain aside in order to measure snap locations.
From the top, Measure 4" down. Mark holes 3" in from the end for both sides of Post.
At bottom of post, approximate side location and measure 0.75 inches up
Important
Hardware
Insect Screen Inst - Attach Male Studs
•Y06992-908 Male Snap x4 per post
•#12 Screw Bezel
Move curtain aside in order to measure snap locations.
From the top, Measure 4" down. Mark holes 3" in from the end for both sides of Post.
At bottom of post, approximate side location and measure 0.75 inches up
Important
Hardware
Insect Screen Inst - Attach Male Studs
•Y06992-908 Male Snap x4 per post
•#12 Screw Bezel
Move curtain aside in order to measure snap locations.
From the top, Measure 4" down. Mark holes 3" in from the end for both sides of Post.
At bottom of post, approximate side location and measure 0.75 inches up
Important
Hardware
Insect Screen Inst - Attach Male Studs
A:
At the top and bottom of each
Post Assembly locate Button Snaps
on Insect Panel then fasten Male
Snaps with Screw to Post Assembly
so it lines up with the Button Snap.
Connect Button Snaps to Male
Snaps. (F8.1, F8.2 and F8.3)
F8.1
F8.2
16 x Male Snap with Screw / Broche Macho con Tornillo /
Fixation mâle avec vis
F8.3
Hardware / Tornillos y accesorios / Quincaillerie
Male Snap with Screw / Broche
Macho con Tornillo / Fixation
mâle avec vis
Bottom of Post Assembly / Parte
inferior del Ensamble del Poste /
Bas de l’assemblage de montant
Top of Post Assembly / Parte
superior del Ensamble del Poste /
Dessus de l’assemblage de montant
Male Snap with Screw / Broche
Macho con Tornillo / Fixation
mâle avec vis
Post Assembly /
Ensamble del Poste /
Assemblage de montant
Post Assembly /
Ensamble del Poste /
Assemblage de montant
Button Snap / Botón
a presión / Fixation
à bouton
Step 8: Attach Insect Panels to Posts
- Paso 8: Fijación de los paneles mosquiteros
a los postes - Étape 8 : Fixation des panneaux pour insecte aux montants
A:
En la parte superior e inferior de
cada Ensamble del Poste, ubique los
Botones a Presión de los Paneles
Mosquiteros y ajuste los Broches
Machos con Tornillo al Ensamble del
Poste de manera que coincidan con
los Botones a Presión. Conecte los
Botones a Presión con los Broches
Machos. (F8.1, F8.2 y F8.3)
A:
Au haut et au bas de chaque
Assemblage de montant, situez les
Fixations à bouton sur le Panneau
pour insecte, puis posez les fixations
mâles à l’assemblage de montant
en les alignant avec les Fixations à
bouton. Fermez les fixations en les
joignant. (F8.1, F8.2 et F8.3)
