49
support@yardistrystructures.com
Slide POLYCARB PANEL through the
grooves in the RIGHT LEFT POSTS
Note: Right Corner of Panel has notch
and must be orientated as such while
Panel faces the outside. Pilot Holes in panel are at top
when installing
Slide POLYCARB PANEL through the
grooves in the RIGHT LEFT POSTS
Note: Right Corner of Panel has notch
and must be orientated as such while
Panel faces the outside. Pilot Holes in panel are at top
when installing
Slide POLYCARB PANEL through the
grooves in the RIGHT LEFT POSTS
Note: Right Corner of Panel has notch
and must be orientated as such while
Panel faces the outside. Pilot Holes in panel are at top
when installing
F11.1
Remove film from both sides of Side Wall Panels.
A:
Refer to pages 16 and 17 and apply top and bottom
tape to Side Wall Panels.
B:
Put Side Wall Panel in the grooves of (1107) Side Wall
Sill then slide into grooves of Left and Right Posts. Make
sure the notch at the bottom is always on the right side of
the panel from outside of the assembly. The UV coated
side must be to the outside of the assembly. (F11.1,
F11.2 and F11.3)
Components
4 x Side Wall Panel
Top Tape
Bottom Tape
(1108)
Left Post
(1109)
Right Post
Side Wall
Panel
Side Wall
Panel
Bottom
Tape
Note: Notches
always at the
bottom right of
each panel
Notches on
this side
Note: UV
Coating to the
outside of the
frame
Top Tape
(1107) Side
Wall Sill
Step 11: Side Wall Panel Assembly
Part 1
(1107) Side
Wall Sill
F11.2
F11.3
(1108)
Left Post
(1109)
Right Post
Post
Side Wall
Panel
