Engine Mount Bolt
(×2)
Engine Mount Bolt
(×2)
REPLACING V-BELT(S)
1. Turn off engine. Engine must be cool.
2. Remove the belt guard to access the V-belt. (See
Figure 7a
)
3. Refer to the belt tension adjustment steps. If the engine can't
be moved to the back of plate any more, the belt may have to
be replaced.
4. loosen the jam nut enough.
5. Push the engine toward the front of plate as far as possible, in
order to loosen the belts enough to slide them off.
6. Slip the old V-belt off the pulleys and install the new one in
their place.
When adjusting the belt, make sure that the clutch
pulley is in alignment with exciter pulley.
3. Tighten the engine mount bolts.
4. Attach the belt guard.
2. Push the engine by hand toward the back of plate to increase
belt tension, then tighten the jam nut. (See
Figure 8c
&
Figure
8d
)
Figure 8c
Figure 8d
Figure 8a
Figure 8b
V-Belt
Clutch Pulley
Exciter Pulley
If the engine can't be moved to the back of plate any
more, the belt may have to be replaced.
LOOSEN
TIGHTEN
Engine Connecting Plate
Jam Nut
15
|
Maintenance
17
mm
18
mm
30
mm
13
mm
11
mm
17
mm
18
mm
30
mm
13
mm
11
mm
29140US25M100.indd 15
2017/3/20 13:50:27
