■
■
■
■
■
Wa
l
k
-
Beh
i
nd Blower
»
Operator's Manual
1.
Spark plug wire is loose
1.
Connect and tighten spark plug wire
l
2.
Move choke lever to OPEN position
2.
Unit running with choke
lever in
CLOSE position
3.
Clean fuel line, and fill tank with clean,
3.
Blocked fuel line or stale fuel
fresh gasoline
Engine runs erratically
4.
Vent plugged
4.
Clear vent
5.
Water or dirt in fuel system
5.
Drain fuel tank, then refill with fresh
fuel
6.
Dirty air cleaner
6.
Clean or replace air cleaner
7.
Improper carburetor adjustment
7.
Refer to engine manual
1.
Engine oil level low
1.
Fill crankcase with proper oil
2.
Dirty air cleaner
2.
Clean air cleaner
Engine overheats
3.
Air flow restricted
3.
Remove housing and clean
4.
Carburetor not adjusted properly
4.
Refer to engine manual
1.
Debris interfering with throttle
Engine
speed
does
1.
Clean dirt and debris
not increase properly
inkage.
when throttle control
2.
Improper throttle linkage
2.
Refer to Engine Manual to check and
is adjusted.
djustment
adjust throttle linkage
1.
Loose parts
1.
Tighten all fasteners
Excessive vibration or
2.
Damaged impeller
2.
Contact an authorized service dealer
noise
3.
Debris in housing
3.
Contact an authorized service dealer
4.
Engine problems (above)
4.
Refer to engine so
l
utions (above)
Troubleshooting I
20
7