7
■
■
■
■
■
UPPER HANDLE
� NOTE
There are two positions
in
which
the handle can be attached
-
a high
position and a lower position
.
Hook the upper handle tabs into the holes on the frame tube (See
Figure 5, illustration1).
Use the bottom hole for the lower handle
position. Use the middle hole for the high hand
l
e position.
Secure the hand
l
e on the frame tube with the carriage screws and
star knobs. (See
Figure 5, illustration2)
Figures
M8x45
x2
Wa
l
k
-
Beh
i
nd Blower
»
Operator's Manual
THROTTLE CONTROL LEVER
Mount the throttle control lever onto the right upper handle with
M5x25 screw and lock nut. Tighten securely using a 8mm wrench
and a Phillips screwdriver.
Secure the throttle control cable on the handle with cable clamp.
(See
Figure
6)
Figure6
Assembly I
10