7
■
■
■
■
■
Throttle Control Lever
))
Regulates the speed of engine. Moving
towards
FAST9
to speed up the engine.
Moving towards LOW-A to lower the engine
speed.
Flow Angle Adjustment Control Lever
)) Adjusts the direction of air flow between 7 positions.
Fan Housing
)) Contains the fan.
Intake Guard
))
Prevents fingers, hands, or large debris from entering
the fan housing and contacting the fan blades.
Front Swivel Caster
))
360 degree swiveling caster to allow for
maneuverability.
Discharge Chute
))
Directs air flow to the left side of the unit from
machine operator's position.
Front Discharge Chute
)) Redirects the air flow toward the front of the unit.
Wa
l
k
-
Beh
i
nd Blower
»
Operator's Manual
Flow Angle Adjustment Index Lever
))
Transits the movement from control lever to the air
flow louver.
Recoil Starter Handle
)) Used to pull-start the engine.
Choke Control
The choke control is used to choke the carburetor
and assist in starting the engine
.
The choke control is
)) slides between the CHOKE and RUN positions. The
CHOKE position enriches the fuel mixture for starting
a cold engine.
))
The RUN position provides the correct fuel mixture
for operation after starting, and for restarting a warm
engine.
Fuel Valve Lever
))
))
))
The fuel valve opens and closes the passage between
the fuel tank and the carburetor.
The fuel valve lever must be in the ON position for the
engine to run.
When the engine is not in use, leave the fuel valve
lever in the OFF position to prevent carburetor
flooding and to reduce the possibility of fuel leakage.
Know
Your
Machine I
14
