background image

Carefully read through this entire operator’s manual 
before using your new Concrete mixer. Pay attention 
to all cautions and warnings.

MODEL AND SERIAL NUMBERS

For future reference, record both the model number 
(see 

Figure 1, Illustration a

) and the serial number (see 

Figure 1, Illustration b

), as well as date and place of 

purchase. Have this information available when ordering 
parts, optional accessories and when making technical or 
warranty inquiries.

DISCLAIMER

YARDMAX reserves the right to discontinue, change, 
and improve its products at any time without notice 
or obligation to the purchaser. The descriptions and 

specifications contained in this manual were in effect at 

printing. Equipment described within this manual may be 
optional. Some illustrations may not be applicable to your 
unit.

ENVIRONMENTAL

Recycle unwanted materials instead of disposing of 
them as waste. 

SUPPORT

Have questions about your YARDMAX equipment?
Call us at 844-YARDMAX, email us at 
support@yardmax.com, or contact us via your 
favorite social media site.

Illustration a

Model Number

5.0 Cuft Electric Concrete Mixer

YM0146

Manufacture Date:

11~20

1~10

2017

2018

2019

1

2

3

4

5

6

7

8

9 10 11 12

21~30

Manufactured in China

120V~ 60Hz,  560W
.75HP
5.0
15.2”
2
25 r/min  
117 lbs
350 lbs

Motor:
Horsepower
Cubic Feet:
Opening Diameter:
Number of Blades:
Drum Speed:
Weight:
Weight Capacity:

Serial Number

Illustration b

0146100010117

2

Electric Concrete Mixer   

»

   

Operator’s Manual

 

     

Introduction    

|

Figure 1

74109US25M101.indd   2

2017/7/4   17:22:32

Summary of Contents for YM0146

















Reviews: