background image

SPECIFICATIONS

Model number

YM0146

Cubic Feet

5.0

Motor

120V~ 60Hz,  560W

Horsepower

.75 HP

Drum Type

Steel

Weight Capacity

316 lbs

number of blades

2

Opening Diameter

15.2 "

Product Weight

117 lbs

SyMBOLS

The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use.

Read these instructions carefully.

Wear eye protection. 

Wear hearing protection.

Wear protective gloves. 

Wear safety footwear.

Only use or operate the mixer on solid, flat, level 
ground that is capable to support the weight 
of the mixer and its load. To prevent the mixer 
from tipping over, only use or operate the mixer 
on solid, flat, level ground capable of supporting 
both the weight of the mixer and its contents.

Do not attempt to move the mixer when 
it is loaded and/or in operation.

Check your mixer before turning it on. 
Keep guards in place and in working 
order. 

Keep hands out of the way of all moving 
parts.

When operating, do not pass hands 
through the clearance between frame 
and support arm or the one between the 
drum and support arm.

Take left over materials to an authorized 
collection point or follow the stipulations 
in the country where the mixer is used. Do 
not discharge into drains, soil or water.

Keep children and bystanders off  
and away.

Disconnect the main plug prior to  
the repair, cleaning, and maintenance of  
the mixer!

3

|

   Specifications & Symbols

74109US25M101.indd   3

2017/7/4   17:22:33

Summary of Contents for YM0146

















Reviews: