YS0952PM00 - 2002
REPLACING HYDRAULIC OIL
Replace the hydraulic oil in your YARDMAX log splitter after
every 150 hours of use. Follow these steps to replace it:
Make sure all moving parts stop and the log splitter
is unplugged.
Unscrew the oil drain bolt with dipstick to remove it.
Tip the log splitter so the oil drain plug is higher than the
motor and refill with 1.72 gallon (7 qt) of fresh hydraulic oil.
Clean the surface of the dipstick and put it back in the oil tank
while keeping the log splitter vertical.
Make sure the level of the refilled oil is between the two
grooves on the dipstick.
Tip the log splitter so the motor end is higher than the oil drain
plug, and drain oil over a 3- gallon container.
Disassemble the log tray table before replacing
the hydraulic oil.
MAX
MIN
10
Electric Log Splitter
»
Operator’s Manual
Replacing Hydraulic Oil
|
Summary of Contents for YS0952
