FEED HOPPER
The Feed Hopper is on top the unit. Always load
leaves and other light waste into the hopper opening.
never insert hands into the hopper opening.
CHIPPER CONE
The Chipper Cone is located on the front of the unit, and
next to the engine. Insert branches and tree limbs no
larger than 3" (7.6cm) in diameter into the chipper cone
opening. never insert hands past the cone opening.
COLLECTION BAG
The Collection bag captures all debris discharged
from the unit. Do not operate the unit without the
collection bag in place.
DEFLECTOR
Chipped debris are discharged through the Deflector
opening. The deflector can be attached to the chute.
GRIP HANDLES
The handles are used to move the unit.
TRANSPORT WHEELS
To move the chipper, grip the handles located on the
top of the opening of the hopper and tilt the machine
back until it is fully resting on the tires.
RECOIL STARTER HANDLE
The handle is used to start the engine.
LEVER
This lever is used choke the carburetor and assist in
starting the engine and regulates the speed of the engine,
will shut off the engine when it is moved to the Stop
position.
Fuel Cap
Lever
Fuel Tank
Dipstick/Oil Fill Plug
Recoil Starter Handle
13
|
Know your Machine
36060US25M100_KOHLER.indd 13
2017/10/17 11:06:11
