Yardworks 060-3095-2, Instruction Manual

model no. 060-3095-2  |  contact us: 1.866.523.5218

model no. 060-3095-2  |  contact us: 1.866.523.5218

13

OPERATION
BEFORE PUTTING INTO OPERATION
1. CHARGING THE BATTERY (SEE FIG. B)

a.  The battery pack (not included) must be fully charged before first use. 

b.  If the battery pack is very hot you must remove your battery pack from the charger and 

allow your battery pack to cool first to ambient temperature and then recharging can 

be started. 

c.  To prevent damage to the battery pack, when charge runs out, please charge the 

battery to reach full or no less than half charge before storage.

d.  If the tool will not be used for long periods of time, charge the battery pack every 3-6 

months.

CHARGING PROCEDURE

1)  Plug the charger (not included) into an appropriate outlet.
2)  Slide the battery pack into the charger, and make sure the battery is in the correct 

charge position firmly. The light will begin flashing green to indicate the charging 

process has started.

3)  When charging is completed, the light will turn solid green.
4)  After the battery is fully charged, unplug the charger and remove the battery pack.

NOTE

: If the battery pack is locked in the charger, press the battery pack release button 

and remove it.

WARNING: When battery charge runs out after continuous use or 

exposure to direct sunlight or heat, allow time for the tool to cool 

down before re-charging to achieve the full charge.

WARNING! The charger and battery pack are specially designed 

to work together so do not attempt to use any other devices. Never 

insert or allow metallic objects into your charger or battery pack 

connections because an electrical failure and hazard will occur.

Operation

A2

A1

C2

C1

D

E2

E1

F

+

-

1

1

2

2

II

I

B