13
model no. 060-3888-6 | contact us: 1-866-523-5218
Safety
IMPORTANT SAFETY INFORMATION
Read and understand this manual fully before assembling and using the
sawhorse and observe all safety precautions. Non observance of safety
precautions may result in injury. Keep this manual for future reference.
Before using the sawhorse always check that all nuts and bolts are secure
and that the sawhorse is not damaged.
Use the sawhorse on firm level ground only. Do not use on sloping or
uneven ground.
After securing a log in the sawhorse, check the stability and balance before
starting to cut. The sawhorse must not be able to tilt.
Never hold the chain close to the chain tubes or place your fingers in the
chain links.
Read and observe the operating instructions of the chainsaw you are using
and wear all recommended safety gear. Always wear safety shoes or boots
in case a log is accidentally dropped on your feet.
Only cut with the bottom of the chainsaw bar as the log may otherwise shift
away from the rotating chain, become unstable and increase the risk of
personal injury.
Clear and stack the sawn logs away from the sawhorse to keep the
work area clear of obstructions and safety hazards.
WARNING:
Do not exceed the specified maximum log
length and maximum log weight as given on page 2 of
this manual.
