background image

model no. 060-3891-6  |  contact us: 1.866.523.5218

20

Additional Safety Rules For the Oharger

Take the tool or charger to your nearest 

authorized service centre or phone and 

speak with an experienced YARDWORKS 

customer service representative for 

assistance in these circumstances:

•  If liquid has been spilled into the tool or 

charger, or if rain or water has touched 

the tool, battery pack or charger.

•  If the tool or charger does not operate 

normally after you follow the operating 
instructions.

•  If the tool or charger has been dropped 

or damaged.

•  If the tool or charger exhibits a distinct 

degradation in performance.

•  If the tool or charger is damaged in any 

way.

•  If the battery pack is not charged within 

the time frame as specified in this 
manual, turn charger off.

•  To reduce the risk of an electric shock, 

unplug the charger from the power 
supply before attempting to clean it. To 
clean tool or charger, wipe with a damp 
cloth. Use of any other cleaners is not 
recommended.

•  Do not place any object on, or allow 

anything to rest on, the charger.

•  Make sure that the charger cable is 

positioned where it will not be stepped 
on, tripped over or otherwise subjected 
to damage or stress. Keep the lead 
away from operating machinery.

•  Do not pull on the lead of the charger to 

disconnect it from the power socket.

•  Do not use an extension cord unless it 

is absolutely necessary. The use of an 
improper extension cord could cause 
fire, electric shock or electrocution.

•  Never attempt to connect two chargers 

together.

•  Do not charge batteries or use the tool 

and battery pack in locations where 
the temperature may be below 0°C or 
exceed 40°C, such as beside sheds or 
metal structures.

•  The battery can be charged or operated 

at temperatures between 0°C and 40°C.

NEVER CHARGE YOUR LITHIUM-

ION BATTERY BELOW OR ABOVE 

TEMPERATURES RECOMMENDED 

OTHERWISE FIRE OR SERIOUS DAMAGE 

TO THE BATTERY PACK MAY OCCUR.

The most suitable temperatures to charge 

the battery pack are between 20–25° C.
•  If you wish to charge a second battery 

pack, unplug the charger from the 
domestic power supply and leave it for 
at least 15 minutes. After this time you 
can charge a second battery pack.

Summary of Contents for 060-3891-6

























Reviews: