background image

model no. 060-3891-6  |  contact us: 1.866.523.5218

21

Additional Safety Rules Related to  the Battery Pack and Battery Safety

•  Use only the batteries supplied with the 

tool or approved replacements.

•  Do not use the battery to power any 

device other than the tool it was sold 
with.

•  Charge the battery only with the charger 

supplied with the tool or approved 
replacements and according to the 
instructions in the instruction manual.

•  Do not charge the battery in a place 

where static electricity is generated and 
do not let the battery touch anything 
that is statically charged.

•  The battery can be stored at 

temperatures between – 0°C and 40°C.

NEVER STORE OR LEAVE YOUR 

LITHIUM-ION BATTERY IN 

TEMPERATURES OVER THAT 

RECOMMENDED, OTHERWISE FIRE 

MAY OCCUR.

Do NOT store the lithium-ion battery 

anywhere that the temperature can 

easily get higher than recommended-this 

includes garden-type sheds, and vehicles 

where the inside temperature can climb to 

dangerous levels in the direct sunlight and 

on hot days. 

THINK BEFORE LEAVING 

YOUR LITHIUM-ION BATTERY PACK IN 

STORAGE.

•  The battery can be charged or operated 

at temperatures between 0°C and 40°C.

NEVER CHARGE YOUR LITHIUM-

ION BATTERY BELOW OR ABOVE 

TEMPERATURES RECOMMENDED, 

OTHERWISE FIRE OR SERIOUS 

DAMAGE TO THE BATTERY PACK MAY 

OCCUR.

The most suitable temperatures to charge 

the battery pack are between 20–25°C.
•  Always allow the battery pack to cool 

down after charging. Do not place it in a 

hot environment, such as a metal shed 
or open trailer left in the sun.

•  Take care where the tool is stored. Do 

not store in areas with corrosive fumes, 
salt air or similar conditions. Try to store 
the tool in the packaging supplied with 
the tool.

•  Do not dispose of the battery in a fire 

or put the battery into a microwave 
oven, conventional oven, dryer, or 
high-pressure container. Under these 
conditions, the battery may explode.

•  Never attempt to open the battery pack, 

puncture the battery or subject the 
battery to strong physical shock.

•  If the plastic housing of the battery pack 

breaks open or cracks, immediately 
stop using it and do not recharge it. 
Ensure the battery pack clip is in good 
condition and will not allow the pack 
to fall free from the tool. If the clip is 
damaged or is not locking the pack in 
place, do not continue to use it.

Summary of Contents for 060-3891-6

























Reviews: