ON/OF
Attaching Extension Cord To Hedger
F SWITCH
(Fig. 2)
OPERATING INSTRUCTIONS
Fig. 2
Fig. 3
9
BEFORE CONNECTING YOUR HEDGE TRIMMER TO THE POWER
OUTLET, ALWAYS TURN THE SWITCH TO THE OFF POSITION. FAILURE TO CHECK
COULD RESULT IN ACCIDENTAL START–UP CAUSING SERIOUS INJURY.
Turning on the hedge trimmer (Fig. 3)
1. Plug into a matching grounded extension cord.
2. Place one hand on the trigger handle (1) . Place the other hand on the auxiliary
handle (2)
.
3. Press the lock out button (4), and then squeeze the trigger switch (3) to turn ON the
hedge trimmer. The trimmer will stay on as long as the trigger switch is squeezed.
Turning off the hedge trimmer (Fig. 3)
1. Release the trigger switch
(3).
2. Allow at least 5 seconds for the cutting blade to stop moving.
2
4
1
3
WARNING:
Use the cord retainer as shown in the picture.