TROUBLESHOOTING
Call us first with questions about operating or maintaining your product
at 1
-
800
-
633
-
1501 between 8:00 a.m. –
5:00
p.m. Eastern Standard Time,
or get assistance on www.americanlawnmower.com.
CALL US FIRST !!
Problem
Possible Couse
Possible Solution
-
Unit does not Run
-
Battery not making contact
-
Check battery is fully inserted
-
Trigger switch not operational
-
Check that lock off button is fully depressed prior to moving trigger
-
Battery not installed properly
-
Check battery installation
-
Battery not charged
-
Check battery charging requirements
Abnormal noises
-
Tine is jammed
.
-
Bolts, nuts or other components are loose.
-
Switch off. Wait till tines comes to a complete stop. Remove jammed
objects.
-
Tighten all components. Arrange for repair if noises continue.
Abnormal vibrations
-
Tines damaged or worn
-
Working depth too large
-
Replace damaged or worn tines.
-
Adjust working depth.
-
Battery will not charge
-
Battery not inserted into charger
-
Insert battery into charger until red LED appears
-
Charger not plugged in
-
Plug charger into a working outlet
-
Check current at receptacle by plugging in a lamp or other appliance
-
Check to see if receptacle is connected to a light switch which turns
power off when you turn out the lights
-
Surrounding air temperature too hot or too cold
-
Move charger and tool to a surrounding air temperature of about 39
degree F (4 degree C) or below 104 degree F (+40 degree c)
Poor results
Working depth too small
Worn tines
Adjust working depth.
Replace damaged or worn tines.
STORAGE
Store the Tiller/Cultivator in a dry, clean area out of reach of
children.
During extended periods of storage, ensure that the tiller/
cultivator is protected against corrosion and rust.
At the end of the season, or if the tiller/cultivator is not being
used for longer than a month, wipe over all metal surfaces
with an oil soaked cloth to protect them from corrosion or
spray with a fine coat of oil.
Do not expose to rain. Store indoors.
For parts or service, please call 1
-
800
-
633
-
1501 or visit us online at www.americanlawnmower.com. Be
sure to provide all relevant information when you call or visit.
REPAIR PARTS (KITS/ ITEMS)
The model number of this tool is found on a plate or label attached to the housing. Please record the serial
number in the space provided below.
MODEL NUMBER TC70020
-
1_____
SERIAL NUMBER_______________
No.
Kit/ Item Number
Description
QTY
1
RTC70020/25
-
FHK
Front Handle Kit
1
2
RTC70020/25
-
TK
-
1
Tine Kit
1
3
BL82120
-
1
Battery Pack
1
4
CHL82000
-
1
Charger
1
Always mention the model number when ordering kits/items for this tool.
9
Model TC70020
-
1
