It is necessary to charge 3.7 V 3400 mAh Lithium-Ion
battery completely before the first flashlight’s use.
BATTERY CHARGING
1.
Place the 18650 battery into the base unit of the recharg
-
er observing the polarity.
2.
Plug the recharger in 220 V supply. Indicator showing the
charging increase places in the base unit. It is red at the
beginning of charging. It becomes green when the battery
is completely charged.
BATTERY INSTALLATION
1.
Put off the cover from battery box turning counterclock
-
wise.
2.
Place the Li-Ion 18650 battery observing the polarity:
positive sign should be at the head of the flashlight.
3. Turn the cover clockwise tightly.
Flashlight’s switch on and its switch off is performed by
pressing the button. To start 100% operation mode of the
flashlight press (click) the button completely. To start 45%
operation mode of the flashlight rotate the head of the
flashlight by 5 degrees. To switch between modes 10%
–
2% press the button
.
To switch off the flashlight press (click)
the button completely.
If the head of the flashlight is screwed in completely the
flashlight will operate in 100% mode only (there is no switch
of modes by pressing the button).
Time of operation of the flashlight with fully charged 18650
battery in 100% mode of operation is
2
.5 hours.
Body of the flashlight has waterproof construction.
IMPORTANT!
The o-ring may be worn out after using
for a long time. If it happens, please replace the o-ring with
a new one to keep the flashlight properly sealed against
water.
FLASHLIGHT’S USE AND MODES
SPECIFICATIONS
CREE XM-L2 T6 LED. Max luminous flux is 600 Lm.
Li-Ion 18650 3.7 V battery
.
Hardly anodized waterproof body is made of aircraft quality
aluminum.
Set also includes 2 extra rubber sleeve rings, wrist strap
and nylon holster for carrying the flashlight on the belt.
Date of manufacture: 02.2021.
2 years warranty.
ATTENTION!
The flashlight is a light source of high intensi
-
ty. Don’t direct the light into the face to prevent the eye
damage!
www.YarkiyLuch.ru
