battery symbol flashing
channel
volume
32
3.3 Digital Infrared receiver
3.3.1 On/Off the receiver
receiver, but please make sure the
batteries are full charged and the polar is correct. When headp hone is connected, the receiver switches to
stand-by state. Pressing the On/Off button switches the receive
channel, and an antenna symbol is visible when the receiver picks up an infrared signal of adequate
quality
Turn off the receiver: When the headphone is removed, the receiver switches automatically to the off-state
(the last channel setting will be cleared)
3.3.2 Channel/volume debug
Select channel: An up/down switch to select an audio channel. T
display (0-15 channels), a volume slider to adjust the /-
3.3.3 Battery capacity warning
A battery symbol is visible when the batteries are almost empty
battery.
3.3.4 Automatically off
Symbol “Y”, and receiver will switch off
automatically in 60 seconds.
