3. Press “M” to enter the “Display speed” menu.
4. Press “Next” to increase the playback speed;
press “PRE” to reduce the playback speed.
Attention:
Once the playback speed is set, this will affect
every song until it is changed again.
• Repeat mode (Play submenu)
1. Please refer to the following descriptions.
2. Enter through the play submenu.
• Synchronised lyrics display
The PMP200 supports the use of “*.Irc” lyric
files for synchronised lyrics display when
playing music.
How to use the lyrics file:
The song and lyric file must have the same name.
For example:
The song file name is xxx.MP3
The lyric file name should be xxx.LRC
If the song file has a matching lyric file,
the lyrics will be shown automatically when
the song is played.
What happens when an .LRC file is played
back?
1. The matching lyrics file is found. The red dot
at the bottom of the screen turns green.
2. Press “M” button enter into the lyric interface.
3. Lyrics are shown on the screen.
4. Press the “M” button to return to music
playback mode.
A-B repeat
1. Enter the music playback or recording
playback mode.
2. Press “M” to enter the play submenu.
3. Press “NEXT” to select the “Repeat mode” menu.
4. Press “M” button enter “Repeat mode”.
Repeat mode: Press the repeat icon “
” “A”
to set starting point “A”.
5. Press “NEXT” to confirm starting point “A”.
Press the repeat icon “
” “B” to set ending
point “B”.
6. Press “NEXT” to confirm ending point “B”.
Repeat icon “A-B” fixed. This starts repeat
playback between A and B, and it will exit
after reaching the set repeat time.
Press “PRE” to re-confirm starting point “A”.
(For repeat times please refer to “Repeat times”).
In Repeat mode, press “VOL+” or “VOL-” to set
the “Playback speed”.
Playback-after-recording function (does not
work with pre-recorded files)
1. Enter the “A-B” repeat function.
2. Press “NEXT” to enter the playback-after-
recording mode.
3. When the repeat icon “
” changes to the
playback-after-recording icon “
”, it begins
to record the user’s voice. The time length is
same as the “A-B” repeat time.
4. When the repeat time is over, it begins to play
the recording. The icon changes to “
”;
then you can press the “Next” button to enter
the contrast function.
Pressing the “PRE” button while in this func-
tion will take you back to the “A-B” repeat
mode.
