background image

3. Fold out the rewinding crank-handle on the Film Rewind Knob and turn it in the direction of the arrow until it 
turns freely.  
 
4. Pull the Film Rewind Knob all the way up to open the back cover, and take out the exposed film.  
 
 

FLASH PHOTOGRAPHY

  

 

An use of flash equipment is recommended when shooting under subdued light conditions. To use a cordless 
flash unit, set it on the direct contact shoe on the camera. For the use of conventional type strobe or AC flash 
unit, plug its cord into Synchro-Terminal.  
 
The FP or X synchronization is determined by the built-in automatic selector according to the setting of the 
Shutter Speed Control Dial.  
 

SPEEDS FOR FLASH SYNC

  

 
* Electronic flash---- Set speed to "60-X" (Synchronizes also at all speeds under 1/60 sec. and B)  
 
* M.F class bulbs--Synchronizes at 1/30 sec. or slower speeds, and B.  
 
* F.P class bulbs--Synchronizes at all speeds other than 1/60 sec.  
 
Correct aperture setting in flash photography is obtained by dividing the flash guide number by the flash-to-
subject distance.  
 
 
 

"B" SETTING

  

 

 

www.orphancameras.com

Summary of Contents for TL Electro










Reviews: