7.
Turn all the locking lever downward again.
8.
Plug again the electronic module, which you have removed
before.
2.6 Wiring
Terminals with spring clamp technology are used for wiring.
The spring clamp technology allows quick and easy connection of
your signal and supply lines.
In contrast to screw terminal connections this type of connection is
vibration proof.
U
max
: 240V AC / 30V DC
I
max
: 10A
Cross section: 0.08 ... 1.5mm
2
(AWG 28 ... 16)
Stripping length: 10mm
1.
Insert a suited screwdriver at an angel into the square opening
as shown. Press and hold the screwdriver in the opposite direc-
tion to open the contact spring.
2.
Insert the stripped end of wire into the round opening. You can
use wires with a cross section of 0.08mm
2
to 1.5mm
2
.
3.
By removing the screwdriver, the wire is securely fixed via the
spring contact to the terminal.
Connectors
Data
Wiring procedure
VIPA System SLIO FM 050
Basics and Assembly
Wiring
HB300 | FM | 050-1BA00 | GB | 15-11
23
