2-2
183574-1CD
183574-1CD
2
Equipment Description
2.2 Controller
ArcWorld 50/50S/52/52S
2.2.1 Programming Pendant
) is the primary means for
programmer/operator interaction with the ArcWorld. The pendant features
a Windows
®
CE operating system and displays information on a 640 X
480 pixels color LCD touch-screen. It also incorporates a SD card slot and
USB port for program backups.
The Programming Pendant provides icon-driven system programming. It
features a menu-driven interface to simplify operator interaction with the
Robot. Most operator controls are located on the Programming Pendant.
This allows remote installation of the Controller. By using the
Programming Pendant, the operator can teach the Robot’s motion,
perform programming, editing, maintenance, and diagnostic functions,
and enable or disable Operator Station control of the ArcWorld. For more
detailed information on the pendant’s programming keys, programming
and display functions, refer to the
Operator’s Manual for Arc Welding
that
is included with the ArcWorld documentation package
).
Figure 2
-
2: Programming Pendant
EM
ERGENCY STO
P
Start button
Hold button
EMERGENCY
STOP Button
SD card slot
PAGE key
USB connector
SELECT key
Manual speed keys
Axis keys
ENTER key
Enable Device
Located on the back of
the programming pendant.
Lightly squeeze this switch
to turn the power ON.
Firmly squeeze this switch
to turn the power OFF.
Cursor key
Mode switch
MOTION
TYPE key
Numeric keys / Function keys
Press these keys to enter numbers.
These keys are also used as function keys.
When inputting instructions, etc.,
these keys are automatically switched
from numeric keys to function keys.
57 of 126