2-6
183574-1CD
183574-1CD
2
Equipment Description
2.4 Work Stations
ArcWorld 50/50S/52/52S
2.4 Work Stations
Each ArcWorld 50 Series work cell comes with support posts for either
weld table or MH-series headstock mounting.
optional weld tables and headstocks available for each work cell.
YASKAWA does not supply weld tables with any standard cell.
Table 2
-
3: Work Cell Options
2.4.1 Stationary Weld Tables
Optional weld tables are available to secure production parts using
customer-supplied tooling fixtures. See
.
Table 2
-
4: Weld Table Specifications
2.4.2 MH185 Headstock (ArcWorld 50S/52S Only)
The MH185 Headstock drive assembly provides precision-controlled
rotary motion and can be mounted in any orientation. The standard
configuration utilizes an AC servo motor, a high-ratio gear reducer with
integral output bearing, faceplate, and a cast iron housing. Each
Headstock also includes one weld ground brush rated at 400 amps. An
optional second brush is available
For detailed Positioner specifications for the MH185 headstock, including
a parts lists breakdown, refer to the MH-series Positioner Manual with
MotoMount and Drive Assemblies (see
”).
System
Weld Table
MH-series Headstock
ArcWorld 50
1
NA
ArcWorld 50S
NA
1
ArcWorld 52
1
NA
ArcWorld 52S
NA
2
Conditions
Specifications
Part Fixture Rating
Each optional table can support up to 300 kg.
Weld Current Rating
600 amperes at 100% duty cycle
NOTICE
In high humidity areas, the weld table tooling plates may rust or
corrode. Use surface protection to prevent corrosion of unpainted
tooling surfaces.
NOTICE
In high humidity areas, use surface protection to prevent corrosion of
the tooling plates.
61 of 126
