2 Mechanical & Electrical Installation
40
YASKAWA ELECTRIC
SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
A - Mark
B - Rear of top protective cover
C - Hooks
D - Front of drive
Figure 2.33 Attach the Top Protective Cover
Attach the Conduit Bracket
Remove the front cover.
1.
Remove the screws that attach the protective covers to the drive.
A - Screws that attach the protective cover
Figure 2.34 Remove the Screws that Attach the Protective Cover
2.
Align the screw holes on conduit bracket 1 with the screw holes on the drive and push the bracket into
position. Use the screws to attach it.
A - Conduit bracket 1
B - Wiring holes
C - Screw holes
D - Screw hole
Figure 2.35 Attach Conduit Bracket 1
3.
Align the screw holes on conduit bracket 2 with the screw holes on conduit bracket 1.
Tighten the screws to a tightening torque of 0.98 N
∙
m to 1.33 N
∙
m (8.67 lb.
∙
in. to 11.77 lb.
∙
in.).
A - Conduit bracket 2
Figure 2.36 Attach Conduit Bracket 2
4.
Attach the front cover.
