3 Startup Procedure and Test Run
YASKAWA ELECTRIC
SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
141
5.
Push
or
to select [Verify (check for mismatch)], then push
.
6.
Push
or
to select the data to verify, then push
.
The keypad shows
“
End
”
when the parameter settings backed up in the keypad agree with the parameter settings
copied to the drive.
Note:
The keypad shows
vFyE [Parameters do not Match]
when the parameter settings backed up in the keypad do not agree with the
parameter settings copied to the drive. Push one of the keys to return to the screen in Step 6.
■
Erase Parameters Backed Up to the Keypad
This procedure deletes parameters that were backed up to the keypad.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on
, push
(Back) to show [Home] on
.
2.
Push
(Menu).
3.
Push
or
to select [Parameter Backup/Restore], then push
.
4.
Push
or
to select the item to delete, then push
.
