B.3 Input Signal Selections
B -11
B.3 Input Signal Selections
The following list shows input signal selections and their factory settings.
User
Constant
Digit
Place
Name
Setting
Contents
Factory
Setting
Pn50A
0
Input Signal Al-
location Mode
0
Sets the input signal allocation for the sequence to the same
one as for the SGDB Servopack. *
1
0
location Mode
1
Possible to freely allocate the input signals.
1
/S-ON Signal
Mapping (Servo
0
Inputs from the SI0 (CN1-40) input terminal.
0: SI0
1
/S-ON Signal
Mapping (Servo
ON when low.)
1
Inputs from the SI1 (CN1-41) input terminal.
0: SI0
ON when low.)
2
Inputs from the SI2 (CN1-42) input terminal.
3
Inputs from the SI3 (CN1-43) input terminal.
4
Inputs from the SI4 (CN1-44) input terminal.
5
Inputs from the SI5 (CN1-45) input terminal.
6
Inputs from the SI6 (CN1-46) input terminal.
7
Sets signal ON.
8
Sets signal OFF.
9
Inputs the reverse signal from the SI0 (CN1-40) input termi-
nal.
A
Inputs the reverse signal from the SI1 (CN1-41) input termi-
nal.
B
Inputs the reverse signal from the SI2 (CN1-42) input termi-
nal.
C
Inputs the reverse signal from the SI3 (CN1-43) input termi-
nal.
D
Inputs the reverse signal from the SI4 (CN1-44) input termi-
nal.
E
Inputs the reverse signal from the SI5 (CN1-45) input termi-
nal.
F
Inputs the reverse signal from the SI6 (CN1-46) input termi-
nal.
Pn50A
2
/P-CON Signal
Mapping (P con-
trol when low.)
0 to F
Same as above.
1: SI1
3
P-OT Signal
Mapping (Over-
travel when
high.)
0 to F
Same as above.
2: SI2
B
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
