YASKAWA
TOEP C730600 97C LCD Keypad Installation Manual
47
■
JOG Operation
Push
to illuminate
. Push and hold
(JOG)
to run the motor. Release
to stop the motor.
■
Change Motor between Forward/Reverse Run
You can change the direction of motor rotation when you use the
keypad to operate the drive. Push
to illuminate
.
Push and hold
(FWD/REV) to toggle the direction of motor
rotation between forward and reverse.
■
Show the Standard Monitor
Push
to show the standard monitor (
Ux-xx
). Push
(HOME) to go back to the HOME screen.
Note:
When a fault, minor fault, or an error occurs, push
to show the content of
the fault. Push
again to show the standard monitor (
Ux-xx
).
■
Change the Frequency Reference Value
1.
Push
to access the screen to change the frequency.
2.
Push
or
to select the digit, then push
or
to change the value.
3.
Push
to keep the changes.
Note:
The HOME screen must show
U1-01 [Frequency Reference]
or you must set the
keypad as the Run command source (REMOTE) to use this function.
