General
1
-
6
1.3
Target group
This manual is directed at users with the following knowledge:
•
Advanced knowledge of mechanical engineering
•
Advanced knowledge of electrical engineering
•
System knowledge of the robot controller
•
Specially trained staff
NOTICE
According to the international DIN EN ISO 10218-1 standard, operators of a robot system
must receive training before they operate the robot.
For optimal use of our products, we recommend our customers to take part in a training
session at the YASKAWA Academy. For information on the training programme, please visit
www.yaskawa.eu.com or contact our branch offices directly.
1.4
Intended use
Typical applications:
•
Flange-mounting tools
•
Installation of spot welding guns
•
Installation of arc welding equipment
•
Installation of grippers
•
Machining and transporting workpieces or products
1.5
Improper use
Any use that deviates from the intended use shall be regarded as impermissible misuse.
This includes:
•
Transport of people and animals
•
Use as ascending aid.
•
Use outside the permissible operating limits.
•
Use in environments with risk of explosion (except for ATEX-approved robots).
•
Overload
•
Use without protective equipment.
NOTICE
Modifications to the robot, e.g. drilling holes or similar modifications, can damage parts.
This will be regarded as improper use (i.e. use that deviates from the intended use) and will
lead to loss of warranty and liability claims as well as loss of the declaration of incorporation.
CAUTION!
The robot system is an incomplete machine.
The robot system may be put into operation only after it has been determined that the
incomplete or complete machine in which the robot system is being installed:
Corresponds to the provisions of the Machinery Directive.
Complies with all relevant (harmonized) standards.
Corresponds to the state of the art.
