5 Tooling Recommendations
5.2 Headstock/Tailstock with MotoMount
5-5
162068-1CD
162068-1CD
MH-SERIES
POSITIONER
5.2
Headstock/Tailstock with MotoMount
5.2.1
Customer-supplied Tooling Fixtures
With MotoMount, the customer-supplied tooling fixture bridges the
headstock and tailstock together as it supports production parts for
welding. Customer design their tooling fixtures to fit their specific needs.
Modifications to existing tooling fixtures will be minimal as long it fits the
current headstock/tailstock configuration (retrofit application)
5.2.2
Multiple Tooling Fixtures
Some applications require multiple tooling fixtures that are switched in and
out of the positioner as production needs change. To prepare these extra
fixtures to work with MotoMount, the following spare parts are needed:
• Bearing adapter
• Bearing
Contact Yaskawa Motoman Customer Service at (937) 847-3200, to
purchase these parts.
5.2.3
Specifications
To ensure that the customer-supplied tooling fixture fits properly to
MotoMount, the following specifications must be met.
5.2.3.1
Parallelism
Inspect both mounting flanges for parallelism to one another. The
combined angle of misalignment for both flanges should not exceed 1/2
degree (
Fig. 5-43: Tooling Fixture Inspection
FLANGE
TOOLING FIXTURE
1/4-DEGREE
ANGLE OF
MISALIGNMENT
1/4-DEGREE
ANGLE OF
MISALIGNMENT
58/101
