8
Cable Wiring
8.1
Disassembly and Reassembly of the Internal Wiring Harness
8-6
HW1484673
HW1484673
5. Connector base
1. Unscrew the cross head APS bolts
which are fixing the connector
base, and then pull the connector base a little bit and disconnect the
tube which is connected to the back side of the grease inlet. Be
careful not to leak grease from the tube.
2. Pull out the connector base further, unscrew the cross head APS bolts
which are mounted on the S-base, and then disconnect the ground
lead wire.
3. Unscrew the pan-head sems screws
which are mounted on the
connector base, and then remove the gasket
and connector for the
internal user I/O wiring harness.
4. Remove the connectors (5 places), except for CN4, connected to the
back side of the 1BC connector. The 1BC connectors are CN1, 2, 3, 4,
5 and 6 from the top to the bottom.
5. Cut off the cable tie
, and then disconnect the tube
.
6. Unscrew the hexagon socket head cap screws
, and then remove
the connector base B
.
7. Unscrew the hexagon socket head cap screws
, and then remove
the saddle
.
8. Unscrew the hexagon socket head cap screws
, and then remove
the saddle
.
9. Cut off the connector sticking out from the connector base box, and
then pull out the internal wiring harness from the top of the S-head.
Table 8-5: Internal Wiring Harness Parts Checklist (Connector Base)
No. Item
Qty.
Note
Cross head APS bolt M6 (length: 12 mm)
*stainless*
8
Cross head APS bolt M6 (length: 12 mm)
*stainless*
6
Pan-head sems screw M4 (length: 16 mm)
*stainless*
Nut M4 *stainless*
2
each
Gasket HW9481087-E
1
Tube HW9404942-B
1
Cut in half
Hexagon socket head cap screw M6
(length: 10 mm) *trivalent chromate*
Conical spring washer 2H-6 *trivalent chromate*
2
each
Tightening torque
10 N•m
Connector base B HW0313048-3
1
Hexagon socket head cap screw M6
(length: 12 mm) *trivalent chromate*
Conical spring washer 2H-6 *trivalent chromate*
Washer M6 *stainless*
2
each
Tightening torque
10 N•m
Saddle CD42
1
Hexagon socket head cap screw M6
(length: 12 mm) *trivalent chromate*
Conical spring washer 2H-6 *trivalent chromate*
Washer M6 *stainless*
2
each
Tightening torque
10 N•m
Saddle CD63
1
Cable tie T50R-HSW
1
1
2
3
4
12
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
12
83/109
