6
Disassembly and Reassembly of the Speed Reducer
6.6
Disassembly and Reassembly of the T-Axis Speed Reducer
6-20
HW1484673
HW1484673
Fig. 6-6(b): Adjustment of T-Axis Gear Part Shim
L
Lo
Shim adjustment is required when replacing the T-axis speed reducer.
0.7
HW0412696-7
0.6
HW0412696-6
0.5
HW0412696-5
0.4
HW0412696-4
0.3
HW0412696-3
0.1
HW0412696-2
0.05
HW0412696-1
Thickness (mm)
Shim No.
Use the thinner shim to fill the space.
(Lo<L)
Add the shim to fill the space between Lo and L.
(Lo>L)
1. Compare the dimensions of the old speed reducer (Lo) with new speed reducer (L).
Procedure for shim selection
Shim
Gear
New speed reducer
Old speed reducer
75/109
