3
Installation
3-1
HW1483270
HW1483270
3
Installation
WARNING
•
Install the safeguarding.
Failure to observe this warning may result in injury or damage.
•
Install the manipulator in a location where the manipulator’s tool or
the workpiece held by the manipulator will not reach the wall,
safeguarding, or DX200 when the arm is fully extended.
Failure to observe this warning may result in injury or damage.
•
Do not start the manipulator or even turn ON the power before it is
firmly anchored.
The manipulator may overturn and cause injury or damage.
CAUTION
•
Do not install or operate a manipulator that is damaged or lacking in
parts.
Failure to observe this caution may cause injury or damage.
•
Before turning ON the power, check to be sure that the shipping
bolts and brackets explained in
fig. 2-1 “Transporting Position”
are
removed.
Failure to observe this caution may result in damage to the driving
parts.
14/88
