7
System Application
7.2 Internal User I/O Wiring Harness and Air Line
7-4
173124-1CD
HW1482991
MPL300
II
Run the field bus cable
by following the steps below.
Fig. 7-2(b): Field Bus Cable Connection
C
Tube for field bus cable
(inside dia.: 12)
Wire harness
Union
S-head
Part Z
1. The tube for a field bus cable (inside dia.: 12
mm) is connected by a union, in which the cable
runs. (See
the step 1 on the left
.)
2. Remove the union from the tube for a field bus
cable. (See
the step 2 on the left
.)
3. Pull the field bus cable
fixed to the cable
until it reaches the union. (See
the step 3 on
the left
.)
4. Cut the cable
from the field bus cable
.
(See
the step 4 on the left
.)
5. Remove the union, fix the cable
to the field
bus cable
, and run it through the
manipulator. (See
the step 5 on the left
.)
Cut
Tube for field bus cable
(inside dia.: 12)
Union
Field bus cable C
Cable A
Step 1
Step 2
Step 3
Step 4
Step 5
Field bus cable C
A
C
A
A
C
A
C
58 of 100
