7.7 Confirming Operation
7-20
Switching on TEACHING CONDITION Window
7.7.3
BWD Operation of Concurrent Job
During BWD operation, a concurrent job and a job without control groups can be set so that
they do not back, on the TEACHING CONDITION window. For the operation procedures,
refer to “7.7.2 Switching Operating Method.”
Operation
Explanation
1
Select {SETUP} under the
main menu.
2
Select {TEACHING COND}.
The TEACHING CONDITION window appears.
3
Select “STEP/TEST RUN
OPERATION MODE.”
Each time [SELECT] is pressed, the setting changes between
“ALL” and “SINGLE.”
Parameter
Contents and Set Value
Initial Value
S4C152
Specifies the user output number to externally output the
“Multi-job operation mode” status at teaching.
0: Not output
1 to 1024: User output number
0
EDIT
DISPLAY
UTILITY
DATA
Short Cut
Main Menu
TEACHING CONDITION
RECT/CYLINDRICAL
LANGUAGE LEVEL
INSTRUCTION INPUT LEARNING
MOVE INSTRUCTION SET
STEP ONLY CHANGING
STEP/TEST RUN OPERATION MODE
BWD OPERATION NO GROUP AXIS
BWD OPERATION CONCURRENT JOB
TWIN COORDINATED MODE
RECT
SUBSET
VALID
STEP
PROHIBIT
SINGLE
PERMIT
PROHIBIT
INVALID
178/210
