2
Notes for Maintenance
2.2
Multi-Port Connector
2-3
HW1485471
HW1485471
2.2
Multi-Port Connector
Three multi-port connectors (refer to
fig. 2-2 “Multi-Port Connector”
the encoders of the motors are provided on the manipulator. (For the
locations, refer to
fig. 2-4 “Locations of Battery Pack and Multi-Port
.)
A multi-port connector has four ports: two for the motor and the other two
for the internal wiring harness. (Refer to
fig. 2-3 “Wiring Connection of
.)
When removing the multi-port connector for a battery replacement, etc.,
be careful not to remove the connector between the motor and the multi-
port connector. If the connector between the motor and the multi-port
connector is removed, the encoder absolute data will be lost.
Fig. 2-2: Multi-Port Connector
Fig. 2-3: Wiring Connection of Multi-Port Connector
Port nameplate
Motor 1
Motor 2
Internal wiring harness “IN” or lead wire “Y”
Internal wiring harness “OUT” or lead wire “X”
Motor
Internal wiring
harness
Battery pack
Multi-port connector
15/134
