3 System Startup
3.1.9 Starting the MPE720
3-30
3. Setting the fixed parameters for axis 1
Display the SVB Definition Window in the Engineering Manager Window. Check that the Fixed Parame-
ters Tab Page has been selected.
a) Select
Axis 1
from the list of axes at the top left of the SVB Definition Window.
b) Select
mm
as the Reference Unit for parameter 4 on the Fixed Parameters Tab Page.
4. Select
File – Save
in the Engineering Manager Window.
5. Select
Axis 2
and make the settings the same way as for axis 1.
6. Select
File – Exit
in the Engineering Manager Window.
a) Axis selection
b) Reference unit setting