x
166006-1CD
166006-1CD
Safety
Safeguarding Tips
RM2-755/1255SL
Positioner
Safeguarding Tips
Mechanical Safety Devices
CAUTION
All operators, programmers, maintenance personnel, supervisors, and
anyone working near the system must become familiar with the
operation of this equipment. All personnel involved with the operation of
the equipment must understand potential dangers of operation.
General safeguarding tips are as follows:
Improper operation can result in personal injury and/or damage to the
equipment. Only trained personnel familiar with the operation of this
equipment, the operator's manuals, the system equipment, and options
and accessories should be permitted to operate this equipment.
• Improper connections can damage the equipment. All connections
must be made within the standard voltage and current ratings of the
equipment.
• The system must be placed in Emergency Stop (E-Stop) mode
whenever it is not in use.
• In accordance with ANSI/RIA R15.06-2012, section 4.2.5, Sources
of Energy, use lockout/tagout procedures during equipment
maintenance. Refer also to Section 1910.147 (29CFR, Part 1910),
Occupational Safety and Health Standards for General Industry
(OSHA).
CAUTION
The safe operation of this equipment is ultimately the users
responsibility. The conditions under which the equipment will be
operated safely should be reviewed by the user. The user must be
aware of the various national codes, ANSI/RIA R15.06-2012 safety
standards, and other local codes that may pertain to the installation and
use of this equipment.
Additional safety measures for personnel and equipment may be
required depending on system installation, operation, and/or location.
The following safety equipment is provided as standard:
Additional safety measures for personnel and equipment may be
required depending on system installation, operation, and/or location.
The following safety equipment is provided as standard:
• Safety barriers
• Door interlocks
• Emergency stop palm buttons located on operator station
Check all safety equipment frequently for proper operation. Repair or
replace any non-functioning safety equipment immediately.
10 of 145
