2-9
183523-1CD
183523-1CD
2
Installation
2.3 Positioner Installation
RM2-755-RDR Postioner
2.3.3.1 Using an Overhead Crane
1. Thread wire ropes through the attached M20 eyebolts on the
headstock and tailstock.
2. Attach the wire ropes to the spreader beam.
3. Make sure the Positioner is in the shipping position and the shipping
lifting bracket is installed.
4. Lift with the Positioner in the posture as shown in
Fig. 2
-
4: Transporting the Positioner (Crane or Hoist)
CAUTION
• Check that the eyebolts are securely fastened on Positioner.
• Use a wire rope strong enough to withstand this weight. Refer to
1 “Positioner Technical Specifications” on page 4-1
for the weight of
the Positioner and other included documentation to ensure the wire
rope is strong enough to withstand this weight.
• Mount the shipping bolts and bracket before transporting Positioner.
Avoid exerting force on the motors when transporting the Positioner. To
avoid injury, be careful when using transporting equipment.
SET-UP/SHIPPING
BRACKETS
HEADSTOCK
TAILSTOCK
SPREADER BEAM
29 of 104
