B-1
183523-1CD
183523-1CD
Appendix B
B.1 Illustrated Parts List
RM2-755-RDR Postioner
Appendix B
B.1 Illustrated Parts List
The Illustrated Parts List (IPL) contains illustrations (exploded views) and
associated parts list tables that show detail parts of a particular
component, assembly, or subassembly.
B.1.1 General
The Illustrated Parts Lists identifies, describes, and illustrates detail parts
of the Positioners Included in this manual with illustrations and tables for
each of the different Positioners. The illustrations included are:
•
1 “Positioner Major Assemblies — 2.0M”
•
2 “Positioner Major Assemblies — 3.0M”
•
•
•
5 “Tailstock Swing Arm Assembly”
B.1.2 Purpose
The IPL provides parts identification and descriptive information for use in
provisioning, purchasing, storing, and issuing spare parts.
B.1.3 IPL Layout
The IPL is arranged so that the illustration (exploded view) for an
assembly appears directly above the parts list table for that illustration.
When this is not possible, due to a large illustration or an extensive parts
list table, the parts list table is listed on the facing page. This format always
attempts to present the illustration and its associated parts list table to the
reader in one view, regardless of viewing format (PDF or printed).
B.1.4 Item Categories Not Included in the IPL
The following item categories are not included in the IPL –
• Standard hardware items (attaching parts) such as nuts, screws,
washers, etc. These are commercially available to the customer.
• Bulk items and consumables such as wire, cable, sleeving, tubing,
certain fluids, etc. These are commercially available to the customer.
• Permanently attached parts that lose their identity because they are
welded, soldered, riveted, etc., to other parts, assemblies, or
subassemblies.
NOTICE
Refer to the included Headstock Manual for illustrations of the included
Headstock and Tailstock.
63 of 104
