2-7
183523-1CD
183523-1CD
2
Installation
2.3 Positioner Installation
RM2-755-RDR Postioner
2.3.2 Shipping Bolts and Bracket
The Positioner is attached to a wooden shipping skid at the factory, prior
to shipment to the customer. The customer is responsible for removing the
Positioner from the shipping skid and inspecting for shipping damage.
Fig. 2
-
2: Shipping Bolt Removal
The Positioner includes shipping bolts and nuts, see
.
1. Extend the M20 leveling bolts to a point approximately 6.35mm below
the headstock and tailstock frames to the leveling bolt plate.
.
Fig. 2
-
3: Setting Leveling Bolts
NOTICE
Notify shipping agent immediately, if there is any shipping damage.
SHIPPING BOLT
SHIPPING SKID
ASSEMBLY
6.35 mm
M20 LEVELING BOLT
LEVELING
BOLT PLATE
27 of 104