YASKAWA
SIEP C730600 0E YAI Modbus TCP/IP Technical Manual
29
No.
(Hex.)
Name
Description
Default
(Range)
F6-15
(0B5B)
Comm. Option Parameters
Reload
Sets when the drive will activate the
F6-xx/F7-xx
communications-related parameters that you
changed. Use this parameter as an alternative to cycling power to the drive to active parameters.
0 : Reload at Next Power Cycle
1 : Reload Now
2 : Cancel Reload Request
Note:
•
F6-15
is reset to
0
after setting
1
or
2
.
•
This parameter is not available in all 1000-series drives.
•
Changes to this parameter take effect immediately. It is not necessary to cycle power on the
drive.
0
(0 - 2)
F7-01
(03E5)
IP Address 1
Sets the static/fixed IP address. Sets the most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
192
(0 - 255)
F7-02
(03E6)
IP Address 2
Sets the static/fixed IP address. Sets the second most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
168
(0 - 255)
F7-03
(03E7)
IP Address 3
Sets the static/fixed IP address. Sets the third most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
1
(0 - 255)
F7-04
(03E8)
IP Address 4
Sets the static/fixed IP address. Sets the fourth most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
20
(0 - 255)
F7-05
(03E9)
Subnet Mask 1
Sets the static/fixed Subnet Mask. Sets the most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
255
(0 - 255)
F7-06
(03EA)
Subnet Mask 2
Sets the static/fixed Subnet Mask. Sets the second most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
255
(0 - 255)
F7-07
(03EB)
Subnet Mask 3
Sets the static/fixed Subnet Mask. Sets the third most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
255
(0 - 255)
F7-08
(03EC)
Subnet Mask 4
Sets the static/fixed Subnet Mask. Parameter F7-08 sets the fourth most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
0
(0 - 255)
F7-09
(03ED)
Gateway Address 1
Sets the static/fixed Gateway address. Sets the most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
192
(0 - 255)
F7-10
(03EE)
Gateway Address 2
Sets the static/fixed Gateway address. Sets the second most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
•
All IP Addresses must be unique.
•
You must cycle power to the drive for the changes to take effect. For non-1000 series drives,
you can set
F6-15 = 1 [Comm. Option Parameters Reload = Reload Now]
.
168
(0 - 255)
F7-11
(03EF)
Gateway Address 3
Sets the static/fixed Gateway address. Sets the third most significant octet.
Note:
•
This parameter is only effective when
F7-13 = 0 [Address Mode at Startup = Static]
.
1
(0 - 255)
