A
System specific event IDs
Chap. 5.19 ‘Diagnostic entries’ page 72
Event ID
Description
0x115C
Manufacture interrupt for EtherCAT / PROFINET IO
OB: OB number
ZINFO1: Logical address of the slave station that triggered the interrupt
ZINFO2: Interrupt type
0: Reserved
1: Diagnostic interrupt (incoming)
2: Process interrupt
3: Pull interrupt
4: Plug interrupt
5: Status interrupt
6: Update interrupt
7: Redundancy interrupt
8: Controlled by the supervisor
9: Enabled
10: Wrong sub module plugged
11: Recurrence of the sub module
12: Diagnostic interrupt (outgoing)
13: Cross traffic connection message
14: Neighbourhood change message
15: Synchronisation message (bus)
16: Synchronisation message (device)
17: Network component message
18: Clock synchronisation message (bus)
31: Pull interrupt component
32: Vendor-specific interrupt min.
33: Vendor-specific interrupt topology change
127: Vendor-specific interrupt max.
ZINFO3: CoE error code
0xE003
Error in access to periphery
ZINFO1: Transfer type
ZINFO2: Periphery address
ZINFO3: Slot
0xE004
Multiple configuration of a periphery address
ZINFO1: Periphery address
ZINFO2: Slot
Event IDs
System 300S
+
System specific event IDs
HB140 | CPU | 315-4PN23 | en | 18-02
157
