5.8.2 Parameters CPU
The CPU does not evaluate each parameter, which may be set at the hardware configu-
ration. The following parameters are supported by the CPU at this time:
n
Short description
–
Short description of the Siemens CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0
V3.2).
n
Order No. / Firmware
–
Order number and firmware are identical to the details in the "hardware catalog"
window.
n
Name
–
The Name field provides the short description of the CPU.
–
If you change the name the new name appears in the Siemens SIMATIC Man-
ager.
n
Plant designation
–
Here is the possibility to specify a plant designation for the CPU.
–
This plant designation identifies parts of the plant according to their function.
–
Its structure is hierarchic according to IEC 1346-1.
n
Location designation
–
The location designation is part of the resource designation.
–
Here the exact location of your module within a plant may be specified.
n
Comment
–
In this field information about the module may be entered.
Supported parameters
General
System 300S
+
Deployment CPU 315-4PN23
Setting standard CPU parameters > Parameters CPU
HB140 | CPU | 315-4PN23 | en | 18-02
44
